Sierra Treasure Hunters Gallery

A Family Oriented 4WDC
Home > Fabrication/Upgrade Photos

ToobWerks


Steve_s_Toy_Looking_Good.jpg

Shots of your roll cages, sports bar, exo skeletons, etc...

8 files, last one added on Jan 02, 2007

General Fabs


4linkpctest1.jpg

Place your proud fabrication work here with a discription of what it is you've done.

14 files, last one added on Jan 24, 2010

2 albums on 1 page(s)

Random files - Fabrication/Upgrade Photos
bengal_doors_(Large).JPG
Rory's Half Doors62 viewsBig John sneaks some tiger stripes on Rory's doors.
Rorys_Bed_Bob_(4).JPG
Shrinking the Metal38 viewsWhen Bobbing the Bed some metal sides will need to be shrunk so it will accept the tail lights properly.
Pictures_004_(Large).jpg
Big John's XO before paint41 views
4linkpctest1.jpg
4-link test45 viewsPoser!
Steve_s_Toy_Looking_Good.jpg
Looking Good65 viewsHere Steve has called upon 4x4beast Fabrication (www.4x4beast.com) to make him some mean EXO. The front is done. Soon we shall start the rear.
FOTRtrailer.jpg
FOTR Trailer74 viewsBig John donated time and materials to modify the FOTR trailer for Del Albright. In this photo you can see where Big John placed the axle over the springs, cut off the original hitch and made the frame a receiver style with a donated coupler from Adventure Trailers, also installed an AT can set on the tongue.
Larry_s_Full_cage_and_EXO_(2).jpg
Sweeet Rock sliders45 viewsThis EXO is nearly bomb proof. See where the rear exo is tied in under the fender well. Those are some serious rock sliders too.
Larry_s_Full_cage_and_EXO_(4).jpg
awsome roll cage42 viewsThe main beam is of 1 3/4 DOM .134 Wall thickness. Cross pieces are 1 1/2 DOM .120 wall thickness. Roll cage goes throught the floor and attached to the frame.

Last additions - Fabrication/Upgrade Photos
4linkpctest1.jpg
4-link test45 viewsPoser!Jan 24, 2010
4linkpctest2.jpg
4-link test38 viewsNeed to trim the bumper wraparound so the tire will stuff more and back to the muffler shop so they can put the exit where I told them to do it in the first place.
Nice view of the fuel skid and the axle housing.
Jan 24, 2010
4linkpctest3.jpg
4-link test41 viewsJan 24, 2010
Fabing_the_fenders_(Large).jpg
FJ40 fender fab23 viewsThe Shannon's Cruiser front fenders were fabricated from scratch by Dick.Sep 07, 2008
FOTRtrailer.jpg
FOTR Trailer74 viewsBig John donated time and materials to modify the FOTR trailer for Del Albright. In this photo you can see where Big John placed the axle over the springs, cut off the original hitch and made the frame a receiver style with a donated coupler from Adventure Trailers, also installed an AT can set on the tongue.Apr 17, 2007
Steve_s_Toy_Looking_Good.jpg
Looking Good65 viewsHere Steve has called upon 4x4beast Fabrication (www.4x4beast.com) to make him some mean EXO. The front is done. Soon we shall start the rear.Jan 02, 2007
Larry_s_Full_cage_and_EXO_(2).jpg
Sweeet Rock sliders45 viewsThis EXO is nearly bomb proof. See where the rear exo is tied in under the fender well. Those are some serious rock sliders too.Jan 02, 2007
Eric_s_Axle.JPG
Thats Hot!60 viewsWatch you pre-heat and post-heat. If you don't know what those are, don't try this at home!Jan 02, 2007